The Standard in Rugged Power Products

Home Up Products Representation Employment News Resources Search Feedback

ETI0001-1486 2.0 kVA All of these products are manufactured by ETI in the United States.

Up
ETI0001-1402 1.5 kVA
ETI0001-1403 1.5 kVA
ETI0001-1406 3.0 kVA
ETI0001-1417 1.5 kVA
ETI0001-1419 2.0 kVA
ETI0001-1420, 1.0 kVA
ETI0001-1429 2.4 kVA
ETI0001-1437 2.0 kVA
ETI0001-1438 2.0 kVA
ETI0001-1439 4.0 kVA
ETI0001-1442 4.0 kVA
ETI0001-1443 2.0 kVA
ETI0001-1444 2.0 kVA
ETI0001-1445 2.0 kVA
ETI0001-1447 2.0 kVA
ETI0001-1450 2.0 kVA
ETI0001-1451 4.0 kVA
ETI0001-1451AA 4.0 kVA
ETI0001-1452 4.0 kVA
ETI0001-1452AA 4.0 kVA
ETI0001-1453 4.0 kVA
ETI0001-1455 4.0 kVA
ETI0001-1456 4.0 kVA
ETI0001-1458 2.0 kVA
ETI0001-1467 2.0 kVA
ETI0001-1473 2.0 kVA
ETI0001-1473AA 2.0 kVA
ETI0001-1473AF 2.0 kVA
ETI0001-1473A 2.0 kVA
ETI0001-1473B 2.0 kVA
ETI0001-1474 2.0 kVA
ETI0001-1479 1.0 kVA
ETI0001-1482 2.0 kVA
ETI0001-1483 2.0 kVA
ETI0001-1486 2.0 kVA
ETI0001-1488 5.0 kVA
ETI0001-1488A1 5.0 kVA

Part Number: ETI0001-1486 
NSN: 6130-01-523-6726

Rugged Mil Spec® 2000 VA Integrated
Rackmount UPS and Intelligent
Power Distribution Unit Combination

General Dynamics ATS Military Power® Mil Spec N5 Configuration
2000 VA Rugged Rack Mount Isolated UPS w/ Integrated
6 Circuit, 2 Pole, Intelligent, Solidstate Power Distribution Unit
With Drip Proof Front Panel, Shallow Depth, Removable Battery

P/N: ETI0001-1486 Rugged MilSpec UPS and PDU Standard Front
P/N: ETI0001-1486 Rugged Mil Spec UPS and PDU Standard Front 
Panel Layout

NSN: 6130-01-523-6726

P/N: ETI0001-1486 Rugged MilSpec UPS and PDU Standard Rear 
P/N: ETI0001-1486 Rugged Mil Spec UPS and PDU Standard Rear 
Panel Layout

ETI0001-0876 Front View
Optional P/N: ETI0001-0876 UPS and PDU Remote Control Panel in 1U

The field proven Military Power® UPS line is ideally suited for military, industrial, computer and telecommunications applications requiring high reliability, rugged construction, compact size and light weight design. These units are equally suited for use in shipboard, airborne, vehicular, field deployed or fixed locations with controlled or uncontrolled environments. The ETI0001-1486 was specifically designed for General Dynamics ATS systems requiring high density power in shallow depth racks. The ETI0001-1486 does not require a separate PDU since the PDU functions are already integrated into the UPS module. This saves rack space, cabling and expense while improving overall reliability. 

The heavy-duty chassis occupies only 4U (7.0”) of rack space and is only 18.5" deep making it suitable for shallow racks as found on submarines. The front panel is sealed meeting the Navy drip proof requirements. The rounded metal corners and rugged handles, both front and rear, aid in safe handling. Internally, all major components are well secured and electrically insulated to prevent damage due to shock and vibration in any axis. These units can be mounted horizontally or vertically. Optional heavy-duty rack slides provide easy installation and removal of the unit with full extension.

The internal shielded input transformer provides galvanic isolation with provisions for both domestic (115 VAC, CONUS) or optional autoranging international input voltages (85-270 VAC, OCONUS).  The optional autoranging input voltage selection allows inputting either 115 VAC or 230 VAC without having to open the UPS enclosure. Special EMI/RFI filters and input power factor correction minimize both input current and harmonics. The input circuit breaker and the galvanic isolation transformer all provide a double pole isolated source for all installations including shipboard systems or overseas locations where phase references and grounding are not consistent. 50 or 400 hertz outputs are available as an option. 

The LED arrays keep the operator informed as to the unit's status including load and battery levels. The Elapsed Time Indicator records the number of operational hours for records and scheduling preventative maintenance of attached equipment. The high intensity audible alarm can be heard in high noise environments and includes an audible disable switch. All controls and protective devices are brought to the front and rear panels with critical switches or circuit breakers having finger guards. Further, all front panel devices are recessed to prevent damage or accidental operation. The internal intelligent PDU allows control of the individual output circuits incorporating thermal and interlock interfaces for additional control and safety, plus Battleshort override. The display and control panel can be mounted remotely in the rack at eye level, or on the keyboard console with only a logic level cable connection. 

The rear panel provides locking MS threaded metal shell connectors for the input and output power with various optional configurations available. The Status connector provides an interface with optional computer software providing loss of AC and low battery status as well as remote shut down capability. The UPS Remote Control and the PDU Remote Control connectors provide an interface to optional remote display/control panels. 

This unit draws air through the front air filter and exhausts out the rear vent into the rack. This allows the unit to be used in negative or neutral pressure racks. For positive pressure racks, rear to front or rear to side versions are available. The removable and washable metal screen air filters and high capacity stainless steel ball bearing fans provide added protection in both controlled and hostile environments. 

The ETI0001-1486 has the added benefit of having a field replaceable battery via a rear drawout battery module. The batteries are maintenance free with immobilized electrolyte and are constructed of flame retardant materials. For more information, see the Battery Technology section. 

See the Power Distribution Units section for a listing of stand alone PDUs. See the N3 Series UPS section for UPS without the integrated PDU and remote control.

Overall, the Rugged Power line is uniquely qualified for critical shipboard, vehicle, airborne or land based systems combining advanced modular design features with highly reliable construction.

Technical Specifications:
P/N: ETI0001-1486
NSN: 6130-01-523-6726

AC OUTPUT
Output voltage: 120 VAC true sinewave standard
Output rating: UPS 2000 VA standard in 4U chassis x 18.5" deep 
0.65-0.75 pf standard
Non-linear load capacity: Up to 100% non-linear load capability w/o derating
Output voltage regulation: UPS ± 3.0% static regulation of nominal
± 4.0% dynamic (0 to 50% load step)
Overload surge capacity: 110% for 10 minutes; 125% for 30 seconds
Harmonic distortion: Less than 5.0% into 100% non-linear load
Output frequency: UPS 60 Hz ± 2.5% synchronized to utility
60 Hz ± 1.0% w/ utility not available

50, 400 or 1000 Hz output available as an option
Operational status AC Input status, UPS operational, UPS alarm, Battery level, Low battery, Load level, Overload LEDs, Elapsed time hour meter
Alarm contacts for Loss of AC and Low Battery
+90 dB audible alarm with audible on/off switch
AC INPUT
Input voltage selection: Nominal 115 VAC, optionally autoranging input of 85-270 VAC
Input voltage tolerance: UPS 85-135 VAC @ full load without using battery, to 70 VAC @ 75% load
Input frequency: From 46 Hz to 70 Hz standard, optional to 440 Hz
Input power factor: Better than 99% typically
Input/output isolation: 2000 VA, up to 120 dB common mode, <1.0 mA leakage
Input transient suppression: Complies with IEEE 587, UL 1449 and Mil Std 1399
Input control/protection: Guarded 2 pole 100 G shock rated circuit breaker (CB1) plus UPS input fuse (F2)
Optional cold start switch available to turn on w/o AC present
Input power connection: MS 3102A-22-2P, 3 pin, threaded locking
INTERNAL BATTERY
Internal battery type: Maintenance free immobilized electrolyte,
Flame retardant materials (Oxygen Index 28+)
Internal battery life: Rated for continuous service life of 5 years
Internal DC protection: Panel mounted fuse standard, breaker optional
Internal battery time: 15 minutes @ 1300 watts (2000 VA @ 0.65 pf, typical full load for computers),
10 minutes @ 1500 watts load (maximum wattage), 
35 minutes @ 50% load
Internal battery recharge: Recharged to nominal in 8 hours
Internal battery replacement: Drawout/plug-in module from front of unit
DISTRIBUTION PANEL
Output circuits: Six controlled outputs via solidstate relays
Output control: Local/remote control panel w/individual load switches
Thermal and remote interlock ON/OFF control
Output receptacles: MS3102A16-10S threaded locking, various options
Operational status Low Battery, On Battery, Warm temperature, Hot temperature, Battleshort and individual Load On LEDs, Alarm Reset pushbutton
MECHANICAL
Dimensions ( H x D x W ): 7.0 (4U) x 18.5 x 19.0 in (178 x 470 x 483 mm)
Rack Slide Mount Patterns: Jonathan, General Devices patterns standard, others optional
Alternate Mounting Options: Table, Wall, Floor, Portable, Horizontal/Vertical
Unit weight: Total
  UPS w/o Battery Module
  Drawout Battery Module
169 lb. ( 77 kg) with lift handles front and rear
105 lb. ( 48 kg) with lift handles front and rear 
  64 lb. ( 29 kg) with lift handles rear
Audible noise: Less than 47 dB @ 5.0 ft., ANSI "A" scale
Cooling type: High capacity, positive pressure, forced air
Cooling air direction: Front intake, exhaust to rear
Air intake filter: Washable metal filter media, others optional
ENVIRONMENTAL
Storage temperature: -40° to 158° F ambient (-40° to 70° C) with fully charged batteries
Operating temperature: 32° to 122° F ambient ( 0° to 50° C), lower/ higher optional
Operating humidity: 0 to 95% relative humidity (non-condensing)
Storage elevation: Up to 40,000 ft (12,192 m)
Operating elevation: Up to 15,000 ft (4,572 m), higher optional
STANDARDS
United States: Meets UL-1778 standard for UPS equipment,
MIL STDs 167-1, 454, 810, 901D Grade A, 1399-300A & 2000
Canada: CSA C22.2 No. 107 UPS safety requirements
EMI Protection: EMI/RFI FCC Part 15, Class A; EN55022; MIL STD 461 
OPTIONAL ACCESSORIES
  Autoranging International Input, Cold Start, Alternate I/O Configurations, Dual Source Input, Battery Expansion, Batteryless Operation, Battery Charger/Conditioner, Power Distribution Units, Software Interface, Asynchronous serial COM port, 10BaseT Ethernet SNMP/HTTP portTransport Cases, Slides and Mounting Kits

This page was last modified on: March 18, 2012
The N5 is one of the most popular configurations for new programs!

  Request Information

The N5 is one of the most popular configurations for new programs! Click for close up view of controls

Home Up Products Representation Employment News Resources Search Feedback

Send questions or comments about this web site to sales@ruggedsystems.com.
Copyright © 1991-2012 Energy Technologies, Inc. All Rights Reserved. Last modified: April 10, 2012
1st Energy™, 1st Power™, 911 Power™, AC anytime™, AC anywhere™, AC backup™, Airborne UPS™, Air Force Backup™, Air Force UPS™, Army UPS™, Backup AC™, Backup Source™, Backup The Web™, Battle Power™, Blackout Prevention™, Business Back UPS™, clean UPS™, Coast Guard Power™, Coast Guard UPS™, Controlling Power™, DC backup™, Disaster Recovery Gear™, Eco Power Source™, eDocs Port™, Energy Tech™, ETI™, Expeditionary Solar™, Extreme Power Source™, Global Power Source™, Global UPS™, Homeland Security Surveillance™, Humanitarian Power™, Hybrid Energy Storage™, Improved Power™, Industrial Backup™, Intelligent PDU™,  Intelligent UPS™, Internet Power Manager™, Lab Power™, Lab UPS™, Light UPS™, Know Power™, Marine Corps Power™, Marine UPS™, Medical Grade Power™, Military Backup™, Navy Power™, Navy UPS™, Network Power Manager™, Office UPS™, open UPS™, Personal Power Source™, Petro Chem Power™, Pipeline Power™, Portable Power Plant™, Powering The Net™, Power Protection™, Power Security™, Preventing Blackouts™, Radar Power™, Railroad Power™, Redundant Power™, Renewable Source™,  Rugged Power™, Rugged Systems™, Rugged UPS™, SCADA power™, Security Gate Power™, Shipboard Power™, Shipboard UPS™, Signal Backup™, Solar Backup™, Solar Power Source™, Soldier Power™, Tactical Computers™, Tactical Medical Office™, Tactical Office™, Tactical Solar Fly™, Tactical Trailer™, Tactical Water Plant™, Telecom Power Source™, the Warfighter™, Traffic Backup™, Traffic Signal Backup™, UPStart™, Utility Backup™, and Warfighter Power™  are trademarks of Energy Technologies, Inc.

Airborne Power®, Diplomatic Power®, Expeditionary Power®, Extreme UPS®, Hybrid Energy Technologies®, Industrial Power Source®, Military Power®,  Mil Spec®, Personal Solar®, Tactical Cables®, Tactical Cooling®, Tactical Computer Workstation®, Tactical Data Vault®, Tactical Field Office®, Tactical Fuel Cells®, Tactical Generator®, Tactical Inverter®, Tactical Micro Grid®, Tactical Power®, Tactical Power Plant®, Tactical Shelter Systems®, Tactical Solar®, Tactical Solar Shelter®, Tactical UPS®, Tactical Vehicle Power®, Tactical Wind Turbine® and Ultimate Survival Gear® are registered trademarks of Energy Technologies, Inc.

Legal Statements